GPON

Huawei EG8010HV6 is a client unit (ont) for Gpon network that offers 1x GPPP port with SC/APC connector and 1x 1g Ethernet port. The EG8010HV6 function as a bridge between GPPP and Ethernet network, but also supports VLAN and QOS for wider network capabilities ...

C-DATA FD511G-F660 is a compact but powerful xpon (Dual-Mode Gon/Epon) that unit designed for home or small office FTTH deployment. It has one optical port (Gon/EPON) and one gigabit Ethernet RJ-45 port, providing the possibility of flexible network co...

Huawei OptiXstar EG8041X6-10 is a GPON ONT Gateway with Wi-Fi 6 support (802.11 a/b/g/n/ac/ax) and a maximum transfer rate of 2402 Mb/s at 5 GHz and 574 Mb/s at 2.4 GHz. The ONT unit is equipped with four LAN ports with a speed of 10/100/1000 Mb/s. Thi...

C-DATA FD511T-R460S is a powerful xgs-pon on designed for internal deployment as an optical FTTX terminal. Supports Standart XGS-Pon (FSAN G.9807.1) with symmetrical bites 10 Gb/s down/10 Gb/s up . With 10 GBE LAN design , low consumption (; Optical Po...

C-DATA FD511H-R360 is a compact but powerful xpon (dual-mode gon/epon) that unit designed for home or small office FTTH deployment. It has one optical port (Gon/Epon) and one 2.5GE RJ-45 port , providing a high-capacity network connection. Thanks to fu...

C-Data FD514GS1-R550 is a modern and powerful Xpon ont unit for FTTH in home and smaller companies. It supports both gpon as well as Epon standards, which ensures wide compatibility with OLT of different manufacturers. Thanks to the integrated WiFi 6 (...

C-DATA FD1601S-B2 is a compact and powerful mini gpon alt unit , designed for smaller to medium FTTH deployment with 128 connected onus on a single PON port. It offers 1 × Gpon Port , 2 × Gigabit Ethernet, 1 × SFP+ Conclink and is also equipped with in...

Optical splitter-passive element in an optical network with different dividing ratio. Standard lengths in/out fibers are 1 meter, G.657A1 fiber. Operational wavelength 1260 nm-1650 nm; Tube Splitters can be stored in optical vani thanks to compact dimensions ...

Optical splitter-passive element in an optical network with different dividing ratio. Standard lengths in/out fibers are 1 meter, G.657A1 fiber. Operational wavelength 1260 nm-1650 nm; Tube Splitters can be stored in optical vani thanks to compact dimensions ...

UbNT Fiber OLT offers providers of internet and telecommunications services a cost-effective data transmission system (Internet, television and voice services) after an optical network. Ufiber OLT allows up to 1024 connected clients.

; Optical Splitter -Passive element in optical network with different split ratio ; Standard IN/OUT fiber lengths are 1.5 meters, G.657A1 fiber ; Operating wavelength 1260 nm-1650 nm ; Thanks to its compact dimensions, TUBE splitters can be...

; Optical Splitter -Passive element in optical network with different split ratio ; Standard lengths of IN/OUT fibers are 1 meter, fiber type G.657A1 ; Operating wavelength 1260 nm-1650 nm ; Thanks to its compact dimensions, TUBE splitters ...

; Optical Splitter -Passive element in optical network with different split ratio ; Standard lengths of IN/OUT fibers are 1 meter, fiber type G.657A1 ; Operating wavelength 1260 nm-1650 nm ; Thanks to its compact dimensions, TUBE splitters ...

UbNT Fiber OLT XGS offers 8x 10GB/S XGS/XG-Port port and supports up to 256 clients per port, a total of up to 2048 clients. To connect connectivity, 4x SFP28 ports with speeds up to 25GB/s are ready.

Ubnt Fiber Coexistenance WDM Filter is a multiplexing module with a wavelength division, combines XGS/XG-PON and GPPS services into a single optical distribution system.

Ubnt Fiber WiFi is a robust, high-performance GPP client unit with router function, four Gbit Ethernet ports and 300MBPS WiFi interface.

UbNT Fiber WiFi 6 is a WiFi 6 Gpon client unit with high-speed Gpon input port and four Gbit Ethernet ports.

Ubnt Fiber Terminal Box is a durable outdoor connecting box allowing installation on a wall or mast. It is used to protect Ufiber (UF-Nano, UF-LOCO and UF-AE) from unfavorable weather, so they can remain functional under all conditions.

UBNT UISP FIBER XG is CPE on the XGS/XG-Pon solution. The device separately is used to convert optics on metalics and can only Bridge mode, not router mode.

Ubnt Fiber XGS is a CPE on the unit for XGS/XG-Pon solution with which you upload your network to 10 Gbit. The device separately is used to convert optics on metalics and can only Bridge mode, not router mode.

BDCOM GP3600-04L-2AC is equipped with 4x Gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed. In addition, it has a built-in dual-AC power.

BDCOM OLT-GSFP-C+ is a standard Gpon OLT SFP module C+. It offers DownLink 2.5 GBPS and uplink 1.25 Gbps at the TX 1490nm/RX 1310nm wavelength and SC/UPC interface.

BDCOM GP3600-08D-2AC is equipped with 8x gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed. In addition, it has a built-in dual-AC power.

BDCOM GP3600-08D-AR is equipped with 8x gpon ports, 4x GE RJ45 ports, 4x 10GE SFP+ ports, 1x console port and 1x out-band port. Supports asymmetric uplink 1.25 GBPS and Downlink 2.5 GBPS PON Transfer speed. In addition, DC has power (13.8 V/2.5 A).