Active components

with TX wavelength: 1310, for temperature range-40 to 85 ° C, cisco compatible

; SFP + SM 10.3 Gbps 1.4 km 1310 nm-40/+ 85C 3.3V ; ; The SFP Module is approved by Ericsson according to the highest quality and functionality requirements. These are verified modules used by customers around the world to build Ericsson networks....

with TX wavelength: 1270, for temperature range-40 to 85 ° C, cisco compatible

with TX wavelength: 1330, for temperature range-40 to 85 ° C, cisco compatible

with TX wavelength: 1310, for temperature range-40 to 85 ° C, cisco compatible

with TX wavelength: 1550, for temperature range-40 to 85 ° C, cisco compatible

with TX wavelength: 1310, for temperature range-40 to 85 ° C, cisco compatible

It is a compact optical transceiver from the Fiber Arsenal EXTERNALS used in telecommunications and data networks. They are popular, widespread, manufacturers of active optical components massively supported module; Optical transceivers (optical modules) J ...

UBNT F-POE-G2 is affordable, gigabit, optical-metallic, outdoor converter that, in addition to the transfer of optical fiber data to metallic cable, can also power the POE. Compared to the first generation, it can withstand a larger higher temperature range.

10G SFP + DAC 30 AWG Cable Passive 1 m Cisco comp. Home ; DAC (Direct Attach Cable) OPTIX used to quickly and inexpensively connect two active network elements 10Gbps speeds. Home ; Compatible with conventional SFP + ports. Cable length 0.5 m. Home10...

S+AO0005 is a 5-meter active optical dac cable. It is a highly efficient way to connect two devices equipped with SFP/SFP+ ports over short distance inside the data switchboard or, for example, between neighboring switchboards. The cable is supported by all microtics from ...

; CRS305-1G-4S + IN is a compact, yet very powerful switch that has four SFP + ports at 10 Gbps/port. In addition to the optical ports, the device also has a one Gigabit Ethernet with PoE IN support for easy access to the device, device configuration...

MC111CS is a media converter designed to convert 100base-FX to 100Base-TX (optical cable to metallic). Kovertor is designed for use with single-mode optical cable, the connector used is SC type.

MC112CS is a media converter designed to convert 100Base-FX to 100Base-TX (optical cable to metallic). Kovertor is designed for use with single-mode optical cable, the connector used is SC type.

Media converter thanks to SFP slot can work with both multimode and single mode minigbic modules. The converter serves as a transition between a classic metallic net and optics. The converter fits wherever the distance between two points is longer than the permits

WDM technology allows two-way data transfer over one optical fiber. The module allows you to communicate at a speed of up to 1.25 Gbps at a distance of 10 km. The module is designed for inserting into the SFP slot Switche or Mediakonvertor MC220L and is powered directly from these assignments

with TX wavelength: 1310, for temperature range-40 to 85 ° C, cisco compatible

CRS309-1G-8S+IN microtik is a very compact but powerful switch. It is equipped with 8 SFP+ slots that support a line speed of 10 Gbps. Total switching capacity 162 Gbps and total non-blocking permeability 81 Gbps. The device is equipped with 800 MHz CPU and ...

Direct 1 m cable to connect two SFP/SFP+/SFP28 device for shorter distances. Low price, consumption and latency for up to 25g Ethernet, Fiber Channel. Connecting SFP/SFP+/SFP28 The cable is fully in line with SFP+ MSA specifications. Technical parameters: length ...

The MikroTik FTC11XG optical converter has an SFP+ slot and a 10G RJ45 interface and, thanks to IP55 resistance, enables a simple conversion of an optical/metallic connection directly on the roof. Thanks to the possibility of powering via PoE (802.3 af...

DAC cable with QSFP28 (100 Gbps) interface for direct connection with these ports. Suitable for example for microtics CCR2216 &CRS504, but also for other manufacturers.

Gigabit converter TP-LINK MC100CM, converter between 1000 Mbps RJ-45 to Multi-Mode SC Fiber, maximum distance 2km, LED indication, wavelength 1310 nm

TP-Link MC210CS converter, 1x1000m RJ45/1 x single-mode sc.

Media converter Single-Mode with SC connector. Version 2 (9 V).