PoE power

Tycon TP-POE-HP-48G is a gigabit power supply/poE inserter that supports up to 50W DC PoE output and is designed to power high-volume devices. This source supports power on pins 4.5 (V +) and 7.8 (-). ; ; Properties: ; Powering the device...

Gigabit PoE Injector/Splitter with LED for power. Injects or splits DC power on all 8 wires. 3678(-) 1245(+) Wire terminal connector. Black Color. 2.25A. Can be used for Starlink DC powering with slight cable/pinout modification ( this or this )!; Feat...

Passive PoE.H 1Gb passive module with overvoltage protection and DIN rail protection ; ; Operating voltage: 8-56V via a removable connector ; Output current: 1.4A max. (0.35A/500mA fuse protected) ; Operating temperature:-30-+ 60 ° C ; Local...

A professional panel that integrates 16 passive PoE injectors and is therefore suitable for powering up to twelve devices with an integrated PoE extractor. This is a great solution for powering wireless devices, IP phones, IP cameras, etc. If the power...

The 802.3AF/AT/BT POE device with 10 GBPS support for a device with an output of up to 60W.

Gigabit Poe Injector from microtics to power any routerboard or other device with integrated PoE splitter. Injector supports 9-48 V adapters (max. 2A) and allows communication at 1 Gbps.

Tycon TP-DCDC-4848GD HP's HP-voltage converter with PoE port with power by 802.3. Input voltage 36-72VDC regulated at 56V/0.625. Source has two isolated inputs for redundant power supply. ; ; Application: ; 48V battery systems ; Wireles...

POE Injector to power remote devices using a network (UTP) cable.

Properties: ; Input voltage 9-36VDC, output voltage 48V IEEE 802.3af ; IEEE 802.3af Injector ; Dual Power Inputs for 2 Power Supply (Reducing Power) ; Integrated gigabit PoE feed ; Protection against short circuit, overvoltage ; Made in ind...

The panel 19"rack integrates 12 Gigabit shielded active POE injectors with a power range of 24-57V. Home ; Universal solution for remote power greater number of active elements with integrated extractor over UTP cabling. Home ; Over-current protectio...

Tycon TP-DCDC-4856G-VHP is a specially designed DC/DC converter with an integrated PoE injector for powering microwave units and other systems that require High Power passive PoE power supply, e.g. PTZ security cameras. The source uses two power channe...

Mains supply 85-265V ~ 50Hz/55V (1.5A), DIN rail, power passive PoE 1Gb, optional power conductors.

Outdoor PoE extractor to power most Routerboard or devices from Ubiquiti gigabit port. This is a converter of active power marked as 802.3af passive PoE 24V/0.5A maximum load 12W. ; Features: ; ; ; Name ; Value ; ; Operating temperatu...

; The DL2U Injector/Distribution (15x) is a 19"chassis with a height of 2U, which contains 15 positions for PoE.Z 1Gb PoE.EU plug-in module or DL.Z 24480303. The individual positions are numbered 1-15. Positions can be masked by means of patches (not...

Source with active POE (802.3AF) and output power 15.4W.

TYCON TP-DCDC-1248GD-HP is HP voltage converter with POE port with 802.3at. Input voltage 10-15VDC is regulated at 56V/0.625A. The source has two insulated inputs for redundant power supply.

High Power DCDC converter with integrated passive PoE injector, input voltage 36-72VDC (red), output voltage 56VDC, 30 W

TP-POE from Tycon Power Systems are quality resources that offer reliable operation even under the most demanding conditions. ; ; The power supplies are shielded and the power is supplied to unused pins 4.5 (V +) and 7.8 (V-). Power is supported wi...

Cloud L2+ Poe Switch, 10x Gigabit Port, 2x SFP, 8x PoE, 802.3af/at, 130W, Rack Mount

10 GBPS POE POE Adapter with 30W output and output parameters 55V/0.55A

MikroTik CSS610-8P-2S+IN is a manageable PoE switch with 8 gigabit ports and 2 SFP+ bays supporting 10 Gbps transmission. PoE-out with a total budget of 140 W is supported on all ports.

Gigabit PoE adapter MHPower to power any routerboard via Gigabit Ethernet. Just connect the power supply and then use the Ethernet cable to connect the injection to the routerboard. For use with any routerboard that supports 9-...

Shielded passive PoE injector/splitter specially designed for powering Starlink units. Power up to 130W, power supply on all pairs.

Tycon Systems TP-POE-10G-BT60 is a professional gigabit PoE++ injector of the IEEE 802.3bt Type 6 standard, designed for powering energy-intensive network devices such as PTZ cameras, Wi-Fi 7 access points, or industrial switches. The unit supports a 1...