Ocelové konstrukce

30/36 antenna holder for mast mount (vertical); total length from the mounting bracket 300 mm; Working height 300 mm; The bracket can be attached to a 40-130 mm diameter rod; tube diameter 60/3 mm; weight-kg; hot dip galvanized;

Support for cabling, or lightning conductors on straight and slightly sloping roofs.

Flat Washer pr. 12 mm

Cramping mast for places with a prerequisite of cascading, more mounted antennas.

Cable termination eyelet hole diameter = 6.4 mm wire cross section = 1.5 to 2.5 mm2 ; The outer diameter = 12 mm, round Home; Connection Type = Crimp Home; Plastic collar = yes Home; Color = blue collar

Square mast mast 2 meters-heat ; ; When sending a shipping service, postage will be added to the mast price according to the GEIS price list, regardless of the amount of the order. !!!! Prices and Types of Transportation HERE !!!!! ; Dimensions:...

Frame RMS 10x140, with 6-threshing. with a screw

Slot holder for a 42 mm diameter mast with one mast locking bolt and one locking screw to secure the sliding part with a 1 to 25 cm offset from the wall or roof; And rotation options. The base (100x100 mm) for anchoring is equipped with four oval holes...

A mast tripod that has been included in PROFI brackets thanks to U-shaped struts and longer lower rollers for better stability. The mast tripod is hot-dip galvanized (both inside and outside) according to EN ISO 1461, which guarantees the galvanizing o...

Publish rod 2m Almgsi diameter 16/10mm.

Downloading tapes for simple and quick mounting of cabling. Dimensions: 98 x 2.5 mm

Embassaging rod with equal end of JR 2.5 Almgsi Tremis VN3012.

Insulating rod for conductors, 680 mm.

The 125 mm tightening strap is used for fast and reliable assembly.

The 160 mm tightening strap is used for fast and reliable assembly.

The 200 mm tightening strap is used for fast and reliable assembly.

The 250 mm tightening strap is used for fast and reliable assembly.

Mast base for placement on flat surfaces. -total height 1500 mm; -pipe diameter 60 mm; -working height 1050 mm; -lower VINT length 500 mm; Surface treated with galvanic zinc.

Insulating rod for collecting rod 430mm ITJ 43 TREMIS VP120.

The mast tripod, which was included in the professional holders thanks to the struts made up of the profile U and the longer bottom vinkla for better stability. The mast tripod is in the surface treatment of hot zinc (from the outside and inside) according to the standard ČSN EN ISO 1461 ...