IMCO Power

Inverter 48V DC/230V ~ 50Hz (500VA)-19"1U, with PMVER1, SNMP, active filter without the possibility of parallel shifting.

DC/DC converter 40-60V/150V (0.6a), attaching to DIN rail or seagull, with double output and ground clamp.

LS150 POE with up to 8i plug-in modules are used for backup power supply 24V and-48 V DC and most devices with 100-230 VAC power up to 100 W thanks to 150 VDC output.

The LS150 POE with up to 8i plug-in modules is used for backed-up 48 V DC power supply and most devices with 100-230 VAC power up to 100 W thanks to 150 VDC output.

DC/DC converter 48 V/24 V (15 A), plug-in module 1U, ZVS technique

The LS110.J backup source, with an output of 280 W, is used for backed power supply 124 and 48 in the device. It has a changer built with the most advanced energy conversion technology with regard to maximum efficiency.

Inverter 24V DC/230V ~ 50Hz (300VA)-19"1U, without display, with active filter, without parallel shifting.

Inverter 24V DC/230V ~ 50Hz (300VA)-19"1U, with PMVER1 display, active filter, without parallel shifting.

Inverter 24V DC/230V ~ 50Hz (300VA)-19"1U, with display PMVER1, SNMP, active filter, without parallel shifting.

Power supply 85-265V ~ 50Hz/55V (1,5A), DIN rail, double output + ground terminal

The backup source of the LS150.Je, with an output of 350 W, is used to power and back up 24V and 48V DC devices. It has a module of converters built by the most advanced energy conversion technology, with respect to maximum efficiency.

The LS1500 source with a power input of up to 1000 W can be configured according to the specific customer requirements.

The modular backup power supply IMCO POWER LS1500 in 2U design can be configured according to the customer's wishes and specific applications. The monitoring and control module can be selected either only as local or with built-in SNMP/web supervision ...

The backup source of the LS150.Je, with an output of 350 W, is used to power and back up 12V and 48V DC devices. It has a module of converters built by the most advanced energy conversion technology, with respect to maximum efficiency.

Backup source type LS150.J, with output of 350 W, is used to power and backup 12 V and 48 in DC devices. It has a module of converters built by the most advanced energy conversion technology, with respect to maximum efficiency.

Backup source LS150.J, with an output of 350 W, is used to power and backup 24 V and 48 in DC devices. It has a module of converters built by the most advanced energy conversion technology, with respect to maximum efficiency.

IMCO POWER LS1000.H backup power supplies series provide backed-up output 24V DC or 48V DC. Depending on the variant, the source can provide an output power of 750 / 900 W, either in one voltage level or some versions provide two output voltages.

IMCO POWER LS1000.H 4815 provides backed-up output 48V (55,2V) DC. The total output power of the power supply is 900W, which allows to power energy-intensive devices, while maintaining compact dimensions and easy mounting on a DIN rail.

IMCO POWER LS1000.H 2425 provides backed-up output 24V (27,6V) DC. The total output power of the power supply is 750W, which allows to power even energy-intensive devices, while maintaining compact dimensions and easy mounting on a DIN rail.

Industrial DC/DC converter 18-35V/12V (10A) with galvanic department, with remote signal Soft Start and Prevention on DIN rail.

Industrial DC/DC converter 18-35V/12V (20A) with galvanic department, with remote signaling Soft Start and Prevention on DIN rail.

Industrial DC/DC converter 18-35V/48V (6A) with galvanic separation, with remote signal Soft Start and prevedenia on DIN rail.

Industrial DC/DC converter 18-35V/54V (3A) with galvanic separation, with remote signal Soft Start and Preventenia on DIN rail.

Industrial DC/DC converter 36-75V/12V (12.5A) with galvanic separation, with remote signal Soft Start and prevedenia on DIN rail.