IMCO Power

Passive PoE module 1 Gbps, 83 W, IP20, plug-in, with a return fuse, with overvoltage protection 5 ka

; The DL2U Injector/Distribution (15x) is a 19"chassis with a height of 2U, which contains 15 positions for PoE.Z 1Gb PoE.EU plug-in module or DL.Z 24480303. The individual positions are numbered 1-15. Positions can be masked by means of patches (not...

Mains supply 85-265V ~ 50Hz/55V (1.5A), DIN rail, power passive PoE 1Gb, optional power conductors.

DC plug-in power module, with two fuses 3 and +24 V settings, or-48 V for each output separately.

Backup power 230V ~ 50Hz/13.8 (8A), a DC/DC converter 48V (2A), DIN rail, temp. comp. charging battery

DC power bar, 19"1U, combining 4x input 18-60 V/16 and up to 1x output, signaling-4x green LED-presence of voltage on each input

Passive PoE module 1 GBPS, 83 W, IP20, plug-in, with return fuse, with overvoltage protection 5 ka

Empty position cover instead of poe.z, or dl.z

Passive PoE.H 1Gb passive module with overvoltage protection and DIN rail protection ; ; Operating voltage: 8-56V via a removable connector ; Output current: 1.4A max. (0.35A/500mA fuse protected) ; Operating temperature:-30-+ 60 ° C ; Local...

DC/DC converter 18-35V/220V (0.6a), with attaching to DIN bar.

DC/DC converter 42-72V/220V (0.6a), with attachment to DIN bar.

Backup power 3x230V ~ 50Hz/55.2V (45A) 19"2U, with supervision PMVer1, the possibility of parallel shifting, rapid

Power DC bar, 19"1U, combining 1x input to 4x outputs (4x 10 A), without LED signaling

Network source 230V ~ 50Hz/54.5V (2a), with attaching to DIN rail, PFC, double output + PE ground clamp.

Mesh power supply 100-240V ~ 50/60Hz/55.2V (2.5A) with assembly on DIN rail, pfc. duplicated output + PE ground clamp and IU VA characteristic.

The LS110.JS backup power supply, with 280 W, is used for backed-up 24 V and 48 V power supply.

The backup source of the LS110.HS, with two output voltages, is used for backup 24 V and 48 in the device. It has a module of converters built by the most advanced energy conversion technology with respect to maximum efficiency. The overall power of the source is 280 W, ...

Network source 85-265V ~ 50Hz/48V (1a), DIN bar, passive POE 1GB, optional power wires.

Industrial DC/DC converter 36-75V/24V (6A) with galvanic separation, with remote signaling Soft Start and Preventenia on DIN rail.

Industrial DC/DC converter 36-75V/24V (12A) with galvanic separation, with remote signal Soft Start and prevenedenia on DIN rail.

Fully on the free position of POE.Z and DL modules for module sources IMCO POWER-1pc in the package.

Parallel connection 2 inputs 9-72V/2a in one output 9-72V/2a

The backup power supply LS1000.H 48241509 is used for backup power supply 48 V (55,2 V) and 24 V DC . The total output power of the power supply is 900W. The source has two output voltages where both levels are galvanically separated.