Power supplies

Empty position cover instead of poe.z, or dl.z

48V power adapter with output capacity of 96W, not only for microtik devices.

Cycle life is approximately 800 cycles at 50% DoD and 25 ° C. when operating the backup power supply, charging voltage 13.5-13.8 V at a temperature of 25 ° C connector type:

Power supply suitable not only for microtik devices, with output voltage 48V and max power 96W.

Compact 24V source with DIN molding and up to 120W.

Shielded passive PoE injector/splitter specially designed for powering Starlink units. Power up to 130W, power supply on all pairs.

Tycon Systems TP-POE-10G-BT60 is a professional gigabit PoE++ injector of the IEEE 802.3bt Type 6 standard, designed for powering energy-intensive network devices such as PTZ cameras, Wi-Fi 7 access points, or industrial switches. The unit supports a 1...

Gigabit Poe Injector from microtics to power any routerboard or other device with integrated PoE splitter. Injector supports 9-48 V adapters (max. 2A) and allows communication at 1 Gbps.

Gigabit DCDC converter with integrated PoE injector 802.3af, input voltage 9-36VDC (redudant), output voltage 48VDC, 17 W

TP-POE-HP-48GD is a high-quality midspan POE source designed to power the device according to the 802.3 AT standard. Output power 35W reliably power and microwave joints such as RACOM RAY17/RAY10, etc. Of course these industrial sources are protection against example ...

Tycon Power Systems TP-SW5G-D is an industrial switch powered by DC voltage in the range of 12-57 VDC. The switch has 5x 10/100/1000 Mbps ports, each with a maximum current of 2A. PoE is designed according to standard 802.3 af/at. Wide temperature rang...

Tycon TP-DCDC-4848GD HP's HP-voltage converter with PoE port with power by 802.3. Input voltage 36-72VDC regulated at 56V/0.625. Source has two isolated inputs for redundant power supply. ; ; Application: ; 48V battery systems ; Wireles...

Power DC bar, 19"1U, combining 1x input to 4x outputs (4x 10 A), without LED signaling

The new 48 series in DIN Resources from the American manufacturer Tycon Systems is suitable for the most demanding; application where high operating reliability and long-term resistance are required for all operational; the conditions. Due to the high temperature range of-40

GOOWEI ENERGY leads designed for backup resources and UPS applications are characterized by high quality, reliability and long operating life. These are closed lead batteries in the VRLA version. Advantages of this design, co-...

MHPower power adapter with 96W indicator and output output, suitable not only for microtik devices.

High-quality stabilized gigabit POE power adapter with grounding, indication LED and output voltage 24 V and max. Count 0.5 A. The maximum output power is 12 W. The adapter is suitable for powering all devices that require PASI ...

Quality, stabilized POE power adapter with grounding, indicator LED and output voltage 48 V and max. Count 0.32 A. The maximum output power is 15.4 W. This model has a gigabit ethernet port and is in white.

This sinus power supply is used to power electrical devices requiring an AC voltage of 230V. When supplying electricity, connected appliances are powered directly from the network. Replacement source, external battery is recharged. When interrupting the El ...

Tycon TP-DCDC-4856G-VHP is a specially designed DC/DC converter with integrated POE injector to power microwave units of other systems that require high power passive PoE power, such as PTZ security cameras. The source uses two power cannons ...