Brackets, Poles

The mast is in the surface treatment of hot-water zinc (from the outside and inside) according to the standard ČSN EN ISO 1461, which guarantees the galvanization of the material with a even zinc layer 0.07-0.087 mm.

The 150 mm tightening strap is used for fast and reliable assembly.

The 315 mm tightening strap is used for fast and reliable assembly.

A mast base for placement on flat surfaces with the need to anchor in the floor; -total height 1200 mm; -pipe diameter 48 mm; -working height 750 mm; -500 mm lower calcium length with two holes with a diameter of 11 mm; for anchoring to the floor; -weight 10.4 kg ...

Antenna holder 50 for attaching to the balcony (horizontal) -Total length from 500 mm fastening caliper -working height 160 mm -The holder can be attached to a rod with a diameter of 25-70 mm (with the caliper"V" 25-75mm) -with the"V" caliper we will deliver the holder on request -průměr trubk...

The holder is taught for antennas for receiving Sat, WiFi, TV, FM and GSM signal. The base for anchoring of the T-shaped holder is fitted with holes with a diameter of 12mm for screws. Dimensions: Total length from wall 350 mm Total height of 160 mm Pipe diameter 42 mm WITH...

Middle-coated anchor for medium load suitable for anchoring in full spaces.

Stopping on mast 90 double-sided Surface treated with hot-dip zinc.

The 300/35/2mm tube height holder and 550mm mounting strip length with 5 holes for securing to the beam is designed not only for UBNT WiFi antennas, but also for the small television logarithmic antennas of ISKRA.

The 300/35/2mm tube height holder and 550mm mounting strip length with 5 holes for securing to the beam is designed not only for UBNT WiFi antennas, but also for the small television logarithmic antennas of ISKRA.

The antennas holder to the window (on the lining) a small left left -total length of 250 mm -working height 120 mm -pipe diameter 28 mm -weight 0.6 kg Surface treated with galvanic zinc

The antennas holder to the window (on the lining) a small right right -total length of 250 mm -working height 120 mm -pipe diameter 28 mm -weight 0.6 kg Surface treated with galvanic zinc

An antenna holder with a cross small to attach to the wall for Sat and WiFi. -Total length of holder from wall 250 mm -working height of the holder 115 mm -pipe diameter 35 mm -weight 1 kg Surface treated with galvanic zinc

MINI holder to mount the wall for TV and WiFi antenna. -Total length of holder from wall 150 mm -Holder height 70 mm -pipe diameter 28 mm -weight 0.42 kg Surface treated with galvanic zinc

The mast is in the surface treatment of hot-water zinc (from the outside and inside) according to the standard ČSN EN ISO 1461, which guarantees the galvanization of the material with a even zinc layer 0.07-0.087 mm.

Embarcing rod for lightning protection with a straight end of 18/10, Almgsi

The mast tripod, which was included in the professional holders thanks to the struts made up of the profile U and the longer bottom vinkla for better stability. The mast tripod is in the surface treatment of hot zinc (from the outside and inside) according to the standard ČSN EN ISO 1461 ...

Holder of a delayed lightning conductor on a pipe diameter 35-43mm. Fastening the insulating rod perpendicular to the tube or parallel to the tube.